How to setup SDconnect C4 wired connection to PC

This is how to connect SD Connect C4 with Xentry 2014, that failed to registrer my multiplexer and hasn’t LAN connecting into a SD connect.

 sd-connect-c4-connection-with-xentry-1 sd-connect-c4-connection-with-xentry-2

 

 

 

 

Solution… here you go.


You should connect ” Wired LAN ” MUX to your PC.
Then switch a your PC’s icon ” wired ” .

Changed –> to next ( uploaded configuration movie ) pass : our major pw.
Not changed –> check you wired LAN driver and cable.

Many troubles had SD connect wired LAN module.
If OK your PC and cable

sdconnect_config000:

https://mega.nz/#!bo92ySQB!ajjQoIrVWXS4TmNO5PnDFF31gY7EQFRlC-hSz0RpK_w  If it doesn’t work, try to reinstall ” SD net control ”

 

Good luck.