Mercedes S430 ETC SCN coding with SD Connect C4

This is a customer feedback working SCN coding on Mercedes S430 ETC with MB Star diagnostic SD Connect C4 diagnostic system.

 

Mercedes model:
Mercedes S430 Elongated (220.170)

 

Device to use:
Dell laptop D630
MB SD Connect C4 
SD-C4-DELL-D630

 

 

 

 

 

 

 

 

 

 

 

 

ETC SCN coding procedure:
Open XENTRY
xentry-scn-coding
Enter user ID and password to log in.
ETC-scn-coding-SD-CONNECT-C4-1
Communication with control unit EGS2…
ETC-scn-coding-SD-CONNECT-C4-2
Data are being determined…
The coding is carried out…
ETC-scn-coding-SD-CONNECT-C4-3

Data are being determined…
Wait 3 seconds…
ETC-scn-coding-SD-CONNECT-C4-4
Switch ignition off
ETC-scn-coding-SD-CONNECT-C4-5
Wait 5 seconds…
Switch on ignition
Control module reset, please wait…
CVN The value is calculated internally by the control unit
Wait 100 seconds…
ETC-scn-coding-SD-CONNECT-C4-6

 

 

 

 

 

 

 

 

 

 

Data are being determined…
Documentation for repair order WDBNG70J25A457136
The SCN coding sequence has been completed successfully.
ETC-scn-coding-SD-CONNECT-C4-7
Click YES to close the file without making a printout.
Data are being determined…
Communication with control unit ETC…
ETC-scn-coding-SD-CONNECT-C4-8

 

 

 

 

 

 

 

Go to SCN coding

ETC-scn-coding-SD-CONNECT-C4-9

Select Fault codes
ETC-scn-coding-SD-CONNECT-C4-10
No fault code present
ETC-scn-coding-SD-CONNECT-C4-11
Done!

www.mbstartool.com