Mercedes Xentry DAS 2015.12 Torrent Free Download

2015.12-mercedes-software1

Come to get the newest Xentry DAS 2015.12 torrent and new information in the data scope for Mercedes Benz passenger car, truck, van, bus.

2015.12-mercedes-software

Free download 2015.12 XENTRY DAS torrent:
https://mega.nz/#!9htBAawT!OT5vMym3wTTepTtb0X2Bz6JvZWPrryw5XdAw3yaX0JM

Main parts in this article:

New features for XENTRY
New feature for Mercedes passenger car, truck, van, bus

Go on reading for more new info of Mercedes software 2015.12

New features & information specific to XENTRY Kit | Kit 2 systems

a) XENTRY PDF Printer
The XENTRY PDF Printer gives you more options to optimize your printouts during a diagnosis session. You can compile and temporarily store print jobs in the XENTRY PDF Printer. For more information on the XENTRY PDF Printer, see the “XENTRY PDF Printer” instructions in the “Information” tab in the Support Tool as well as in the XENTRY Portal under “Diagnosis World”.

b) Driver for D-Link WLAN Stick N 150 Pico integrated in XENTRY Connect
As of this update, the driver for D-Link WLAN Stick N 150 Pico is integrated. If you do not have WLAN enabled for your XENTRY Connect, you can use the stick to work wirelessly. The D-Link Stick is available on the open market. For more information on the integrated D-Link Stick models, see the XENTRY Kit 2 user guide, section 6. The user guide can be found in the Support Tool under “Information” as well as in the XENTRY Portal in “Diagnosis World”.

c) New version of animated info CD – version 12/2015 for download
The new animated info CD for XENTRY Kit 2 is here! It contains information on current topics concerning the initial startup of XENTRY Kit 2 as well as on new tools on XENTRY Kit | Kit 2. Have a look! The animated info CD is available in “Diagnosis World” in the XENTRY under “Downloads” as well as in the form of an additional CD for this update.

d) DidA – new user guiding for “Automatic Quick Test” (AKT)
Automatic quick test user guiding in XENTRY Diagnostics has been redesigned. As of now, detailed information is available during and after the automatic quick test on the XENTRY Tab | Tab 2. Among other things, the actual values are now displayed directly on the XENTRY Tab | Tab 2, for example the navigation data version.

New features in the data scope for passenger cars

Note:
Market launch-relevant DVD for the model series: X 166 facelift, C 205, A 217

Model series: All
System: XD frame
The tab “Fuse assignment” has been omitted. All its contents have been moved to the
information page (book icon near the print icon). The information is displayed once the vehicle identification is completed.

Model series: 242
System: Drivetrain Gateway (N93/8)
The special function “Download extended freeze frame fault data from the control unit”
has been supplemented with the option of manually entering the desired file size.

Model series: 253 Plugin
System: Air conditioning
The high voltage fuse test for PTC and A/C compressor has been implemented.

Model series: All
System: Air conditioning
The XENTRY simulation has been optimized.

Model series: All
System: Stationary heater
The XENTRY simulation has been optimized.

Model series: All
System: WSS
XENTRY data entry for the system has been completely revised.

Model series: SAM driver
System: 172, 231
Data entry for the model series 172 and 231 facelift has been updated.

Model series: SAM rear end
System: 172, 231, 205
Data entry for the model series 172 and 231 facelift and for the model series 205 coupe
has been updated or adapted.

Model series: 205, 222, 217
System: Emergency tensioning retractor
The initial startup procedure of the system has been revised.

Model series: All
System: SAM driver
The XENTRY simulation has been optimized.

Model series: All
System: SAM rear end
The XENTRY simulation has been optimized.

Model series: 204
System: Headlamps
The XENTRY simulation has been optimized.

Model series: 204, 207, 218, 172, 231, 197, 212
System: CGW
The XENTRY simulation has been optimized.

New features in the data scope for vans
Van model: 415, 447 v-class, 447 vito, 448 v-class, 448 vito, Metris

Model series: 415
Note:
Fault freeze frame data is available for the following control units:
– CDI, ESP, IC, ME-SFI, PTS, TPM, SAM, SRM
No freeze frame fault data is available yet for the control units SRS and ES.
Systems:
CDI – ‘CDI’ motor electronics for ‘OM607’ internal combustion engine (code: MO3)
Before programming, a check is performed as to whether the control unit is no longer
communicating on the CAN bus. This ensures that programming can be started reliably.
ME – ‘ME’ motor electronics for ‘M200’ internal combustion engine (code: MO4)
Before programming, a check is performed as to whether the control unit is no longer
communicating on the CAN bus. This ensures that programming can be started reliably.
RD – Radio (A2) (code: E1M)
Diagnosis is available in its entirety for the radio with navigation system.

Model series: 447 (V-Class)
Note:
Content that has not yet been created or tested as of the DVD release will be supplied as soon
as possible in an add-on.
IMPORTANT NOTE
For some control units, symptom checks are available in addition to fault code-based checks
in the tab “Troubleshooting via complaints or symptoms”.
Functions:
The following functions are now available in the functions view:
– CAN bus
– On-board electrical system
– ECO start/stop function
– Standstill control
– HOLD function
– DISTRONIC PLUS
– Blind Spot Assist
– Lane Keeping Assist
Systems:
ESE, third seat row on left: electrical seat adjustment of the third seat row on the left
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE rear left: electrical seat adjustment at the rear left
ESE rear right: electrical seat adjustment at the rear right
Basic diagnosis is available in its entirety for the control units.
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
SAM – Signal acquisition and actuation module
Actual values for signal and status of the brake light switch have been added to the
“Exterior lights” group. Actuation of the assembly part “K57 (battery cutoff relay)” is now
possible in the “Relay” group. Installation location for the assembly part “F109 (Backup battery fuse)” has been added.

Model series: 447 (Vito)
Note:
Content that has not yet been created or tested as of the DVD release will be supplied as soon
as possible in an add-on.
Diagnosis is available in its entirety for Latin America.
IMPORTANT NOTE
For some control units, symptom checks are available in addition to fault code-based checks in the tab “Troubleshooting via complaints or symptoms”.
Functions:
The following functions are now available in the functions view:
– On-board electrical system
– ECO start/stop function
– Standstill control
– HOLD function
– Blind Spot Assist
– Lane Keeping Assist
– Fuel tank fill level
Systems:
ESE, third seat row on left: electrical seat adjustment of the third seat row on the left
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE rear left: electrical seat adjustment at the rear left
ESE rear right: electrical seat adjustment at the rear right
Basic diagnosis is available in its entirety for the control units.
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
SAM – Signal acquisition and actuation module
Actual values for signal and status of the brake light switch have been added to the “Exterior lights” group. Actuation of the assembly part “K57 (battery cutoff relay)” is now possible in the “Relay” group. Installation location for the assembly part “F109 (Backup battery fuse)” has been added.

Model series: 448 (V-Class)
Note:
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
IMPORTANT NOTE
For some control units, symptom checks are available in addition to fault code-based checks in the tab “Troubleshooting via complaints or symptoms”.
Functions:
The following functions are now available in the functions view:
– CAN bus
– On-board electrical system
– ECO start/stop function
– Standstill control
– HOLD function
– DISTRONIC PLUS
– Blind Spot Assist
– Lane Keeping Assist
– Fuel tank fill level
Systems:
ESE, third seat row on left: electrical seat adjustment of the third seat row on the left
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE rear left: electrical seat adjustment at the rear left
ESE rear right: electrical seat adjustment at the rear right
Basic diagnosis is available in its entirety for the control units.
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
SAM – Signal acquisition and actuation module
Actual values for signal and status of the brake light switch have been added to the “Exterior lights” group. Actuation of the assembly part “K57 (battery cutoff relay)” is now possible in the “Relay” group. Installation location for the assembly part “F109 (Backup battery fuse)” has been added.

Model series: 448 (Vito)
Note:
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
IMPORTANT NOTE
For some control units, symptom checks are available in addition to fault code-based checks in the tab “Troubleshooting via complaints or symptoms”.
Functions:
The following functions are now available in the functions view:
– On-board electrical system
– ECO start/stop function
– Standstill control
– HOLD function
– Blind Spot Assist
– Lane Keeping Assist
– Fuel tank fill level
Systems:
ESE, third seat row on left: electrical seat adjustment of the third seat row on the left
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE, third seat row on right: electrical seat adjustment of the third seat row on the right
ESE rear left: electrical seat adjustment at the rear left
ESE rear right: electrical seat adjustment at the rear right
SAM – Signal acquisition and actuation module
Actual values for signal and status of the brake light switch have been added to the “Exterior lights” group. Actuation of the assembly part “K57 (battery cutoff relay)” is now possible in the “Relay” group. Installation location for the assembly part “F109 (Backup battery fuse)” has been added.

Model series: Metris
Note:
Content that has not yet been created or tested as of the DVD release will be supplied as soon as possible in an add-on.
IMPORTANT NOTE
For some control units, symptom checks are available in addition to fault code-based checks in the tab “Troubleshooting via complaints or symptoms”.
Functions:
The following functions are now available in the functions view:
– On-board electrical system
– ECO start/stop function
– Standstill control
– HOLD function
– Blind Spot Assist
– Lane Keeping Assist
– Fuel tank fill level
Systems:
Diagnosis is available in its entirety for all systems

New features in the data scope for trucks
Truck model: 963/964/967/957/967, NGE/UGE/UHE

Model series: 963/964/967/957
System: Communications interface (COM)
Note: Diagnostic simulation adjusted.

Model series: 963/964/967/956
System: Telematics platform (TP)
Note: Diagnostic simulation adjusted.

Model series: 963/964/967/957
System: Radio (TCC)
Note: Fault freeze frame data added for fault code, diagnosis simulation adapted, control unit programming available.

Model series: 963/964
System: Sensor and actuator module, chassis (SCH)
Note: Brief information for fault codes adapted, parameter saving provided, diagnosis simulation
adapted.

Model series: 963
System: MSF
Note: Further new switches made available regarding actual values and the associated
parameters. Implemented administration data record parameter.

Model series: 963/967
System: SSAM
Note: Further new switches made available regarding actual values and the associated
parameters. New lighting parameters provided for changing individual instances of fault
detection. Implemented administration data record parameter. Further new fault codes
supplemented/extended with brief information.

Model series: 963/967
System: VDRU2
Note: Further new fault codes supplemented/extended with brief information.

Model series NGE/UGE/UHE
Systems: MUX101B, MUX0201B, MUX0301B
Note: Actuations are available.

New features in the data scope for buses

Model series: Mercedes-Benz
Note: After selecting one of the product groups “CONECTO”, “TRAVEGO”, and “TOURISMO”, select the 6-digit vehicle model designation and confirm with “Continue”. If you do not do this, a warning is displayed and the process has to be repeated. The same procedure already applies for the product groups “CITARO II” and “CAPACITY”. Alternatively, you can also use the “Automatic vehicle determination” function in the “Bus” tab.

For more info about 2015.12 Xentry DAS kit, please go to:
http://www.mbstartool.com/wholesale/mb-sd-connect-compact-4-star-diagnosis-dell-d630-laptop.html